- Manuals
- Brands
- Norlake Manuals
- Refrigerator
- UR27
- Installation, operation and maintenance instructions
Undercounter refrigerators and freezers
Hide thumbs
1
Table Of Contents 2
3
4
5
6
7
8
9
10
11
12
-
- Contents
- Table of Contents
- Troubleshooting
- Bookmarks
Advertisem*nt
Table of Contents
- 1 Table of Contents
- 2 Specifications
- 3 Receiving Inspection
- 4 Safety Information
- 5 Set-Up and Installation
- 6 Reversing the Door Swing (27" Solid Door Models)
- 7 Start-Up and Operation
- 8 Cleaning and Maintenance
- 9 Trouble Shooting Guide
- 10 Wiring Diagrams
- Download this manual
1
UNDERCOUNTER REFRIGERATORS AND FREEZERS
Installation, Operation and Maintenance Instructions
Please read this manual completely prior to installing and operating this equipment.
This manual describes how to install, operate and maintain the product in order to
obtain the optimum in performance, efficiency and reliability.
7/20 171215
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Norlake UR27
-
Refrigerator Norlake Walk-In Installation Manual
Kold locker fast-trak fineline mini rooms enviro-line (89 pages)
-
Refrigerator Norlake AdvantEDGE NLR23-G Installation, Operation And Maintenance Instructions
Bottom mount refrigerators & freezers (10 pages)
Summary of Contents for Norlake UR27
- Page 1 UNDERCOUNTER REFRIGERATORS AND FREEZERS Installation, Operation and Maintenance Instructions Please read this manual completely prior to installing and operating this equipment. This manual describes how to install, operate and maintain the product in order to obtain the optimum in performance, efficiency and reliability. 7/20 171215...
-
Page 2: Table Of Contents
REVERSING THE DOOR SWING (27” SOLID DOOR MODELS) START-UP AND OPERATION CLEANING AND MAINTENANCE TROUBLE SHOOTING GUIDE WIRING DIAGRAMS SPECIFICATIONS UNDERCOUNTER REFRIGERATORS MODEL STORAGE CAPACITY (FT³) ELECTRICAL REFRIGERANT SHIP WT (lbs) UR27 115/60/1/3.5 R290 UR36 115/60/1/3.5 R290 UR48 12.5 115/60/1/3.5 R290 UR60 15.9 115/60/1/3.5... -
Page 3: Receiving Inspection
RECEIVING INSPECTION Congratulations on your purchase of a quality built appliance. When properly installed and maintained this product will give many years of trouble free service. It was shipped using trusted carriers with a history of careful handling, good customer service and prompt delivery. -
Page 4: Safety Information
SAFETY INFORMATION This manual may contain notices that identify situations that could cause death, serious injury and /or damage to the appliance or property. Please make note of the following definitions; ! WARNING Indicates a hazardous situation which could result in death or serious injury. - Page 5 • Do not use the appliance should the power cord become damaged. The power cord should not be altered, jerked, pinched, bundled and/or used to hang objects from. Such actions could result in electrical shock or fire. To disconnect the unit from power, be sure to grasp and pull on the plug, not the cord.
-
Page 6: Set-Up And Installation
SET-UP AND INSTALLATION CAUTION This unit uses a flammable refrigerant. Use care when handling and operating to avoid damaging the refrigerant tubing or increasing the risk of a leak. ! WARNING This appliance must be installed in accordance with all applicable national, state and local regulations. - Page 7 Once the Casters or Legs are installed the unit can be returned to its upright position. Be sure to work in pairs when returning the unit to the upright position. NOTICE Do not operate the unit for 1 hour after returning the unit to its upright position to allow the oil to settle in the Compressor.
-
Page 8: Reversing The Door Swing (27" Solid Door Models)
Reversing the Door Swing (27” solid door models) The 27” solid door models come standard with a right hand hinged door. To reverse the door to left hand hinging follow the steps below. You will need a Bottom (145683) Left Hand Hinge to reverse the door swing. -
Page 9: Start-Up And Operation
START-UP AND OPERATION After meeting the set-up and installation requirements the unit is ready to start-up. Once the power cord is connected to a live outlet the unit will start cooling. Allow the unit to run for two (2) hours prior to loading it with product. Temperature Adjustment The Temperature Control is located on the inside back wall of the unit and comes pre- set to the mid-point position which will give internal temperatures of approximately +38º... -
Page 10: Cleaning And Maintenance
CLEANING AND MAINTENANCE All service should be performed by factory authorized personnel. All component parts shall be replaced with like components to minimize the risk of possible ignition due to incorrect parts or improper service. ! Warning Disconnect the unit from the power supply prior to conducting any maintenance, cleaning or servicing the appliance. -
Page 11: Trouble Shooting Guide
3. Use a soft bristled brush to remove any dirt particles that are on the fins of the Condenser Coil. A vacuum cleaner may be used along with compressed air to loosen and remove particles. 4. Replace the grill and re-connect to power. It is recommended to check and/or clean the coil 4 times a year depending on the installation. -
Page 12: Wiring Diagrams
UF WIRING DIAGRAM UR WIRING DIAGRAM 7/20 171215...
This manual is also suitable for:
Ur36Ur48Ur60Ur72Uf27Uf48 ... Show all
